Look up error codes by appliance type. Understand what's wrong, what to try, and when to call a pro.
4 codes documented for Maytag ice makers
The ice maker harvest cycle did not complete within the allotted time. Ice may be stuck to the evaporator plate. Check for low water supply or a frozen water inlet tube. If the water supply is adequate, the harvest motor or the refrigerant charge may be at fault.
The freeze cycle is taking longer than expected. This may indicate a dirty condenser, high ambient temperature, a failing compressor, or low refrigerant. Clean the condenser coils and ensure adequate ventilation around the unit.
The ice maker is not receiving adequate water flow. Check that the water supply valve is fully open, inspect the water line for kinks, and verify the water filter is not clogged. Household water pressure must be at least 20 psi for proper operation.
The bin temperature sensor is reading above the safe threshold. Ice in the bin may be melting. Check that the condenser is clean and the door seal is intact. If ambient temperature is within range and the error persists, the refrigeration system requires professional diagnosis.
From our expanded knowledge base
The ice maker harvest cycle did not complete within the allotted time. Ice may be stuck to the evaporator plate.…
The freeze cycle is taking longer than expected. This may indicate a dirty condenser, high ambient temperature, a failing compressor,…
The ice maker is not receiving adequate water flow. Check that the water supply valve is fully open, inspect the…
The bin temperature sensor is reading above the safe threshold. Ice in the bin may be melting. Check that the…
Our technicians can diagnose any issue, even codes that aren't documented here.
Fill out the form and we'll confirm your appointment within 2 hours. No pressure, no obligation.
A straightforward process with no hidden fees or surprises.
Or call us directly
We confirm within 2 hours